Stationary trunk conveyors
Stationary trunk conveyors are used to transport rock mass and other bulk material in different mines, including gas and dust hazardous mines, in macroclimate regions in accordance with standard GOST 15150-69.
Stationary trunk conveyors are available with belt width 1200 and 1400 mm. Conveyors can be installed both as separate haulage unit and as a part of automated conveyor line.
Conveyor design enables safety sensors installation interlocked with safety guards of drive and tension stations to avoid start-up of the conveyors when safety guards are removed.
Conveyor belt has a chute shape due to side rollers inclination at the upper three-roller idlers of the conveyor. The pulling capacity of the belt is transferred via driven pulleys received from drive units. The belt is tensioned with the tensioning device.
Technical data:
1. Belt speed, m/s 0.5-3.15
2. Receiving capacity, m/min 26.2 – 44.7
3. Belt width, mm 1200, 1400
4. Drive
4.1 Power, kW 4x250 or 4x315
5. Explosion-proof equipment
Power, quantity and manufacturer of drive units, drive pulley diameter, lagging type and other parameters are defined from the Customer's specific requirements. The company offers individual approach to every client to choose both domestic or imported electrical parts, rollers, conveyor belts and other purchased parts.